Digital Hydraulic Testers - DHM
WT portable hydraulic components are integrated to measure pressure, flow, temperature and speed. A portable range of testers will allow you to easily and safely simulate operating conditions using the built-in load valve to help pinpoint the fault. A safe and clean environment is maintained by including the unique INTERPASS™ protection system. In the event of over-pressurisation, burst discs built into the load valve will safely bypass oil internally through the valve and back to the tank. NOT externally where it could contaminate theenvironment or physically injure a person
Product Features
- Bi-directional pressure balanced load valve
- Internal burst discs
- Simplified control
- Accurate measurement
- Robust cases and controls
Item No. | Item Designation | Description | QTY | RRP | Special Price / pc |
6100018002 | WT-DHM-L00400-B0420-G16 | Bluetooth Digital Hydraulic Tester 400 LPM | 4 pcs | $9,379.45 | $6,500.00 |
Flow Turbine - Type Flow-Meter-PPC-04/12-SFM
The Flow-Meter-PPC-04/12-SFM Flow Turbine is permanently installed in the pipeline. The oil flow rotates the internal axial turbine. The frequencies generated are processed by digital electronics (a signal converter). Interferences caused by flow effects are compensated by this process. The signal converter is now directly integrated into the Flow Turbine. This allows even simpler operation and supports permanent coupling of the turbine and signal converter components that are matched to one another.
The Flow Turbine also improves the response time (from previously 400 ms to 50 ms) and increases the measuring accuracy.
In general, the Flow Turbine can handle flows in either direction. The specified technical data and the calibration (available as an option) apply only when the flow through the Flow Turbine matches the recommended flow direction. A double-headed arrow is shown on the nameplate of the Flow-Meter-PC-04/12-SFM. The thicker end of the double-headed arrow specifies the recommended direction of flow.
Note: A Connection Cable-PPC-04/12-3 (3 m / 9.84 ft) is needed to connect the Flow Turbine to the current Hydraulic Testers.
Item No. | Item Designation | Description | QTY | RRP | Special Price / pc |
1810000150 | Flow-Meter-PPC-04/12-SFM-015 | Flow Turbine 0-15 LPM (.27-3.90USGPM) | 1 pc only | $4,258.15 | $2,500.00 |
Analogue Flow Indicators - SDM
Analogue flow indicators for measuring the flow rate of fluids in mobile and industrial hydraulics.
Product Features
- Suitable for Mineral Oil (Aluminium)
- Designed for In-line installation
- Mechanical flow measurement
- Flow indication in l/min and GPM for Aluminium units
- Aluminium unit: Dual scale
- Thread to connect with a pressure gauge
Item No. | Item Designation | Description | QTY | RRP | Special Price / pc |
1910000613 | SDM-750-A-180-T | Flow Iindicator 180 LPM | 2 pcs | $1,558.15 | $1,000.00 |
In-line Flow Monitors - Type SFF
The STAUFF In-line Flow Meter is ideal for monitoring case drain, pump performance and media flows through hydraulic circuits and sub-circuits. It allows the designer to install it in any orientation (horizontal, vertical or inverted ) and is weather-tight for use outdoors and/or on systems where washdowns are required. It is also a reliable service tool that provides years of maintenance-free performance. Flows can be measured up to a value of 550 l/min / 150 GPM.
Item No. | Item Designation | Description | QTY | RRP | Special Price / pc |
1810011373 | SFF-L00005-O-B0250-G08-W85 | In-line Flow Meter - 2-19 LPM - Aluminium - for use with oil - G1/2” BSPP | 3 pcs | $720.85 | $400.00 |
1810011323 | SFF-L00040-O-B0250-G16-W85 | In-line Flow Meter - 15-150 LPM - Aluminium - for use with oil - G1” BSPP | 3 pcs | $1,101.55 | $750.00 |
STAUFF Serviceline Plugs - Mixbox / Micro / STD / XL
STAUFF Serviceline plugs offer an environmental and material protection system preventing oil and chemical spills and leakages.
Product Features
- Minimises spillage
- Provides dust free protection
- Re-usable
- Wipes clean
- Quick and easy 3 step installation:
(1) Insert (2) Push (3) Push & Twist - Ideal tool for professional hose fitters
- No additional tools required for assembly
- Easy identification – bright yellow colour
- Packaged in re-closable blister packs
- Resistance to most oils and chemicals
Item No. | Item Designation | Description | QTY | RRP | Special Price / pc |
2020076472 | SSP-01/42-YE-MIXBOX | STAUFF Serviceline Plug Mixbox | 73 pcs | $202.75 | $65.00 |
2020073453 | SSP-01/10-YE-PK20 | STAUFF Serviceline Plug Mini Micro 1-10 mm (Box of 20) | 22 pcs | $165.15 | $55.00 |
2020067695 | SSP-05/22-YE-PK10 | STAUFF Serviceline Plug Original 5-22 mm (Box of 10) | 13 pcs | $165.15 | $55.00 |
2020067696 | SSP-13/42-YE-PK4 | STAUFF Serviceline Plug XL 13-42 mm (Box of 4) | 13 pcs | $165.15 | $55.00 |